Maintenance & Support
Easimaker Sugarcane Juice Machine
– Daily Maintenance & Repair Guide
Professional Care Instructions to Ensure Longevity, Hygiene, and Performance
🛠Introduction
To maintain the performance, hygiene, and lifespan of your Easimaker sugarcane juice machine, it’s crucial to follow daily maintenance routines and understand basic upkeep and repair procedures. This guide covers everything you need to know for smooth, safe, and efficient machine operation.
🧼Part 1: Daily Cleaning & Maintenance Routine
🕓Recommended Time: After every use or at the end of each working day
🧍♂Who Should Do It: Operator or shop staff trained on machine use
✅ Step-by-Step Cleaning Procedure
- Power Off & Unplug
– Turn off the power switch.
– Unplug the machine from the electrical outlet to ensure safety.
- Drain Residual Juice
– Open the drain valve (if applicable) and remove any remaining juice or sugarcane pulp from the machine.
- Disassemble Pressing Parts
– Remove the rollers (if detachable), juice tray, waste bin, and any juice guide panels.
– Handle sharp parts (e.g., blades or scrapers) with care.
- Clean Each Component Separately
Use the following method for each part:
– Warm water (40–50°C) mixed with mild dish detergent.
– Use a soft brush or sponge to scrub juice residues, fibers, and stains.
– Rinse thoroughly with clean water.
– Air-dry completely or wipe with a clean microfiber cloth.
- Wipe Internal & External Surfaces
– Use a damp cloth to wipe the motor housing and other non-removable parts.
– Avoid splashing water into the motor or control box.
– Disinfect food-contact surfaces with a food-safe sanitizer.
- Reassemble and Inspect
– Once all parts are dry, reassemble the machine.
– Inspect visually for signs of wear or blockage before next use.
🛠Part 2: Weekly and Monthly Preventive Maintenance
📅Weekly Tasks
– Lubricate moving parts if your model requires (use food-grade lubricant).
– Check screws and bolts for tightness.
– Clean air vents or cooling fans using compressed air.
📅Monthly Tasks
– Inspect belts, gears, or chains (if applicable) for signs of wear.
– Check the motor for unusual sounds or overheating during operation.
– Inspect power cords and plugs for any damage or burn marks.
– Perform a full internal cleaning with technician supervision if used in high-volume operations.
⚙Part 3: Troubleshooting & Basic Repair Guide
| Issue | Possible Cause | Solution |
| Machine won’t start | – Not plugged in- Power switch off- Overheat protection triggered | – Check power supply- Wait for cooling- Press reset button (if applicable) |
| Low juice yield | – Rollers dirty or worn- Sugarcane too dry | – Clean or replace rollers- Use fresh, juicy cane |
| Strange noise during operation | – Foreign object inside- Loose parts | – Turn off immediately- Inspect and remove debris- Tighten parts |
| Juice leakage | – Seals or gaskets damaged- Tray misaligned | – Replace damaged seals- Reinstall juice tray properly |
| Motor overheating | – Long continuous use- Poor ventilation | – Let machine rest- Ensure airflow is not blocked |
| Cane stuck in rollers | – Overloading- Cane too hard | – Reverse the motor (if supported)- Gently remove cane using tongs |
📝Note: If you’re unsure or the problem persists, please contact Easimaker’s service team or your dealer for support.
🧯Part 4: Safety Reminders
– Never insert hands or tools into the roller section while the machine is running.
– Always unplug the machine before cleaning or performing any maintenance.
– Use only original Easimaker spare parts for repairs.
– Keep the machine away from direct water contact and avoid operating in wet environments.
– Do not attempt to disassemble the motor or electrical parts unless you are a qualified technician.
🔩Part 5: Spare Parts & Service Support
Easimaker provides full support for:
– Replacement rollers
– Juice trays
– Pulp bins
– Seals, gaskets, and safety switches
– Motors and control panels (for authorized repair only)
Please contact our service team or visit www.easimaker.com for manuals, video tutorials, or to request spare parts.
🤝We’re Here to Help
If you have any maintenance or repair issues not covered here, please email us at [email protected] or reach out via sending messages to us from the following form: